Last Updated :Fri, Nov 01, 2024

My Cart
  • ACCOUNT
  • WISH LIST
  • QUOTE
Toggle Nav
 
callus_header_image 69year_header_image
paymenticons_header_image buyicon_header_image
 
See A Recap From Our first Live Instagram Virtual Demonstration Day 2023.
<< Back To All Categories
Search

10" x 16" Brand New Jet Horizontal Mitering Bandsaw , Mdl. J-7020M, MFG Number JT9-414474, Mitering Head Swivels to Cut Any Angle 0 - 45 Degrees, Swing Away Control Panel Houses Major Saw Controls, Variable Speed Drive, Adjustable Blade guide with Six Contact Point System, Blade Rides on Two Load Bearings Mounted o Pivot Shaft with Side Bearings & Carbide Pads Assisting in Distributing Load Equally, Downfeed System Controlled by Dual System of Counterbalance Springs working with Hydraulic Cylinder, Heavy Duty Transmission, Cast Iron Blade Wheels, Coolant System, Adjustable Material Stop, 1" Bi-Metal Blade, Jet Red Assurance 2-Year Warranty, #SMJ7020M

Stock No:
#SMJ7020M
MFG Number:
JT9-414474
Manufacturer:
Jet
Model:
J-7020M
Capacity:
10" x 16"
Serial Number:
55064-10
Condition:
New
Brand New Jet Horizontal Mitering Bandsaw
Print a Quick Quote!
Add to Wish List Add to Compare
brand new jet horizontal mitering bandsawJ-7020M
$9,569.00
brand new jet horizontal mitering bandsawJ-7020M
main product photo
View Gallery
EnglishVideo
1/410雨田用机械动力剪了升级控制，MDL M-3060，正面操作电源后挡瓦特/英寸和公制读数，广场臂，前支腿，一润滑系统，电动脚踏板，备用谢菲联，＃A3669 1/4“×10”雨田用机械动力剪了升级控制，MDL M-3060，正面操作电源后挡瓦特/英寸和公制读数，广场臂，前支腿，一润滑系统，电动脚踏板，备用谢菲联，＃A3669     To Buy or sell new or used shear for sale please visit http://www.Sterlingmachinery.com   http://www.sterlingmachinery.com/shears.php   Call Today!  626-444-0311
SpanishVideo
14" Brand New MACC Manual Cold Saw (Ferrous Material), Mdl. MACC 350 EDV, Movable Head - 45 deg L/45 deg R, Reduction Unit in Oil Bath, Double Hinged Pin with Eccentric Brush, Double Quick Locking Vise, Coolant Filter, Power Driven Pump for Band Cooling, 14" Brand New MACC Manual Cold Saw (Ferrous Material), Mdl. MACC 350 EDV, Movable Head - 45 deg L/45 deg R, Reduction Unit in Oil Bath, Double Hinged Pin with Eccentric Brush, Double Quick Locking Vise, Coolant Filter, Power Driven Pump for Band Cooling, Jet Separation System to Keep Blade Oiled, Sliding Counter Vice for Longitudinal Cutting, Bar Stop, Bar Support Arm, Service Tools, Instruction Manual, #SMMACC350EDV   To Buy or sell new or used Vertical or Horizontal Bandsaws for sale please visit http://www.Sterlingmachinery.com   http://www.sterlingmachinery.com/saws.php Call Today!  626-444-0311 To Sell Your Machinery visit  http://www.sterlingmachinery.com/sell_machinery.php     Vertical Bandsaw, Horizontal Bandsaw, Sterling Machinery, Dealer, Used, New, Metal Working Machines, Machine Tools, saw, dealers, fabrication, tool, supply, suppliers, sell, sale, metalworking, buy, chip, new, used, 
ChineseVideo
14 Ga. x 161" Used Cidan Mechanical Guillotine Shear With Front Part Shoot and Programmable Control, Mdl. EVO-40, Quick Blade Gap Adjustment For Accurate Cuts, Low Profile, Pneumatic Sheet Support With Return Plate (Blanks To Front Side of Shear), Sheets 14 Ga. x 161" Used Cidan Mechanical Guillotine Shear With Front Part Shoot and Programmable Control, Mdl. EVO-40, Quick Blade Gap Adjustment For Accurate Cuts, Low Profile, Pneumatic Sheet Support With Return Plate (Blanks To Front Side of Shear), Sheets Fall In Front Allowing You To Place The Shear Against The Wall- Space Saver!, Programmable Back Gauge Control- Can Make Multiple Cuts From One Sheet.,  Year (2015)  #C5115     To Buy or sell new or used shears for sale please visit https://www.Sterlingmachinery.com   https://www.sterlingmachinery.com/shears.php Call Today!  626-444-0311 To Sell Your Used Metal Cutting Shear, Mechanical Shears, Hydraulic or CNC Machinery visit  https://www.sterlingmachinery.com/sell_machinery.php   Metal Cutting Shear, Hydraulic Shear, Mechanical Shear, Buy, Sell, Trade, Dealer, Sterling Machinery, Dealer, Used, New, Metal Working Machines, Machine Tools,  
DETAILED SPECIFICATION
Cutting Capacity
10" x 16"
90 Degree Round
10"
45 Degree Round
10"
90 Degree Rectangle
10" x 14" AND 2" x 16"
45 Degree Rectangle
8-1/2" x 9"
Vise Swivels
45 Degrees
Head Movement
45 Degrees
Blade Size
1" x 0.035 x 135"
Blade Length
135"
Blade Wheel Diameter
14"
Blade Speed
100 - 350 SFPM
Bed Height
25-1/2"
Drive
Variable Speed
Horsepower
1-1/2 HP
Prewired Voltage
230V
Voltage
115/230V ~ 1 Phase
Dimensions (L x W x H)
76" x 30" x 48"
WEIGHT
924 lbs
EQUIPPED WITH
Mitering Head Swivels To Cut Any Angle 0 - 45 Degrees
Variable Speed Drive
Swing Away Control Panel Houses Major Saw Controls
Adjustable Blade Guide With Six Contact Point System
Coolant System
Blade Rides On Two Load Bearings Mounted O Pivot Shaft With Side Bearings & Carbide Pads Assisting In Distributing Load Equally
Downfeed System Controlled By Dual System Of Counterbalance Springs Working With Hydraulic Cylinder
Heavy Duty Transmission
Cast Iron Blade Wheels
Adjustable Material Stop
1" Bi-Metal Blade
Jet Red Assurance 2-Year Warranty

Additional Information

APPLICATIONS: Deep draw work Bending Embossing Coining Forming Blanking Punching OBL Series STANDARD FEATURES Large double-acting cylinders Generous window openings Six point square-type gibbing Modular “stack” cartridge valve design Power units Pendant-mounted, PLC interface control
* Temporary specifications subject to verification.

  All quotations subject to prior sale.

  New pricing is good only at time of invoice and must be paid Immediately to guarantee no price increases by the manufacturers.

Similar Machines
New-Jet-Brand New Jet Horizontal Bandsaw -J-7020-JT9-414472-SMJ7020-01
$6,989.00
10" x 16" Brand New Jet Horizontal Bandsaw , Mdl. J-7020, MFG Number JT9-414472, Swing Away Control Panel Houses Major Saw Controls, Variable Speed Drive System Allows Operator to Easily Fine Tune Blade Speed, Adjustable Blade guide with Six Contact Point System, Heavy Duty Transmission, Patented 3-Jaw Vise with Rapid Action Movable Jaw for Faster Set Up, One Piece Wheel Cover, Coolant System, Cast Iron Blade Wheels, Adjustable Material Stop, 1" Bi-Metal Blade, Certified by CSA Group, Jet Red Assurance 2-Year Warranty, #SMJ7020
Stock No:#SMJ7020
Manufacturer: Jet
Capacity: 10" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Jet Horizontal Bandsaw
Video Icon
View Complete Specs
New-Jet-Brand New Jet Horizontal Bandsaw -J-7040-JT9-414478-SMJ7040-01
$6,989.00
10" x 16" Brand New Jet Horizontal Bandsaw , Mdl. J-7040, MFG Number JT9-414478, Swing Away Control Panel Houses Major Saw Controls, Variable Speed Drive System Allows Operator to Easily Fine Tune Blade Speed, Adjustable Blade guide with Six Contact Point System, Heavy Duty Transmission, Patented 3-Jaw Vise with Rapid Action Movable Jaw for Faster Set Up, One Piece Wheel Cover, Coolant System, Cast Iron Blade Wheels, Adjustable Material Stop, 1" Bi-Metal Blade, Certified by CSA Group, Jet Red Assurance 2-Year Warranty, #SMJ7040
Stock No:#SMJ7040
Manufacturer: Jet
Capacity: 10" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Jet Horizontal Bandsaw
Video Icon
View Complete Specs
New-Jet-Brand New Jet Horizontal Bandsaw -J-7040-4-JT9-414499-SMJ7040-4-01
$7,089.00
10" x 16" Brand New Jet Horizontal Bandsaw , Mdl. J-7040-4, MFG Number JT9-414499, Swing Away Control Panel Houses Major Saw Controls, Variable Speed Drive System Allows Operator to Easily Fine Tune Blade Speed, Adjustable Blade guide with Six Contact Point System, Heavy Duty Transmission, Patented 3-Jaw Vise with Rapid Action Movable Jaw for Faster Set Up, One Piece Wheel Cover, Coolant System, Cast Iron Blade Wheels, Adjustable Material Stop, 1" Bi-Metal Blade, 2 H.P. Motor, Jet Red Assurance 2-Year Warranty, #SMJ7040-4
Stock No:#SMJ7040-4
Manufacturer: Jet
Capacity: 10" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Jet Horizontal Bandsaw
Video Icon
View Complete Specs
New-Jet-Brand New Jet Horizontal Mitering Bandsaw -J-7040M-JT9-414475-SMJ7040M-01
$9,569.00
10" x 16" Brand New Jet Horizontal Mitering Bandsaw , Mdl. J-7040M, MFG Number JT9-414475, Mitering Head Swivels to Cut Any Angle 0 - 45 Degrees, Swing Away Control Panel Houses Major Saw Controls, Variable Speed Drive, Adjustable Blade guide with Six Contact Point System, Blade Rides on Two Load Bearings Mounted o Pivot Shaft with Side Bearings & Carbide Pads Assisting in Distributing Load Equally, Downfeed System Controlled by Dual System of Counterbalance Springs working with Hydraulic Cylinder, Heavy Duty Transmission, Cast Iron Blade Wheels, Coolant System, Adjustable Material Stop, 1" Bi-Metal Blade, Jet Red Assurance 2-Year Warranty, #SMJ7040M
Stock No:#SMJ7040M
Manufacturer: Jet
Capacity: 10" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Jet Horizontal Mitering Bandsaw
Video Icon
View Complete Specs
New-Jet-Brand New Jet Horizontal Mitering Bandsaw -J-7040M-4-JT9-414484-SMJ7040M-4-01
$9,679.00
10" x 16" Brand New Jet Horizontal Mitering Bandsaw , Mdl. J-7040M-4, MFG Number JT9-414484, Mitering Head Swivels to Cut Any Angle 0 - 45 Degrees, Swing Away Control Panel Houses Major Saw Controls, Variable Speed Drive, Adjustable Blade guide with Six Contact Point System, Blade Rides on Two Load Bearings Mounted o Pivot Shaft with Side Bearings & Carbide Pads Assisting in Distributing Load Equally, Downfeed System Controlled by Dual System of Counterbalance Springs working with Hydraulic Cylinder, Heavy Duty Transmission, Cast Iron Blade Wheels, Coolant System, Adjustable Material Stop, 1" Bi-Metal Blade, Jet Red Assurance 2-Year Warranty, #SMJ7040M-4
Stock No:#SMJ7040M-4
Manufacturer: Jet
Capacity: 10" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Jet Horizontal Mitering Bandsaw
Video Icon
View Complete Specs
New-W.F. Wells-Brand New W.F. Wells Manual Horizontal Hinge Type Bandsaw-L-10-SML10-01
$11,295.00
10" x 16" Brand New W.F. Wells Manual Horizontal Hinge Type Bandsaw, Mdl. L-10, 1" Bi-Metal Blade, Carbide Blade Guides, Manual Vise, Manual Blade Tensioner, 45 Degree Manual Swiveling Vise, Blade Brush, Built-In Coolant System, Automatic End-of-Cut Shut Off, Blade Powered Rotary Cleaning Brush, 45 Degree Swiveling Vise, All Motors & Controls, TEFC Motors, Electrics to NFPA 79 Standards, Low Voltage Protection, Overload Protection, Quick & Easy Blade Speed Change, Blade Speed & Work Selector Chart, All Safety Guards, Hydraulic Oil, Operator Manual & Parts List, #SML10
Stock No:#SML10
Manufacturer: W.F. Wells
Capacity: 10" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New W.F. Wells Manual Horizontal Hinge Type Bandsaw
View Complete Specs
New-Wellsaw-Brand New Wellsaw Horizontal Manual Bandsaw-1016-SM1016-01
Starting At:
$10,146.00
10" x 16" Brand New Wellsaw Horizontal Manual Bandsaw, Mdl. 1016, Spring Loaded Carbide Guides with Rollers, Combination Reduction Gearbox & Perimeter Ring Gear Blade Drive, Baldor Motor, 4 Blade Speeds, Rite-Tension Blade Tensioning Device, Variable Hydraulic Downfeed Control, Flood Type Wet Cutting System, Rotary Blade Brush, 110V at Controls, Overload & Undervoltage Protection, Precision Ground Bed, Quick Acting Vise, Positive Frame Lock, Adjustable Stock Stop/Back Gauge, Automatic Shut Off at End of Cut, OSHA Blade Guarding, Tiger-Tooth Bi-Metal Blade, Coolant for Initial Start Up, #SM1016
Stock No:#SM1016
Manufacturer: Wellsaw
Capacity: 10" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Wellsaw Horizontal Manual Bandsaw
View Complete Specs
Used-Scotchman-Used Scotchman (Swivel Head Mitering) Horizontal BandSaw With Power Clamp
$10,500.00
10" x 16" Used Scotchman (Swivel Head Mitering) Horizontal BandSaw With Power Clamp "Made In The USA" Heavy Duty, Mdl. SH1016, Manual Feed, Swivel Head, American Made, (1) Horizontal Hydraulic Clamp, #A7243
Stock No:#A7243
Manufacturer: Scotchman
Capacity: 10" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
View Complete Specs
New-Baileigh-Brand New Baileigh Horizontal Semi-Automatic Dual Mitering (Swivel) Band Saw -BS-20SA-DM-BA9-1001298-SMBS20SADM-01
Starting At:
$22,759.00
13" x 18" Brand New Baileigh Horizontal Semi-Automatic Dual Mitering (Swivel) Band Saw , Mdl. BS-20SA-DM, MFG Number BA9-1001298, Dual Mitering 45° Left & 60°Right, 1-1/4" Blade, Inverter Driven, Dual Mitering 45°Left & 60° Right, Digital Readout for Blade Speed, Blade Brush with Chip Collection Drawer, Quick Lock Vise, Automatic Descent & Raise of Bow Head, #SMBS20SADM
Stock No:#SMBS20SADM
Manufacturer: Baileigh
Capacity: 10" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Baileigh Horizontal Semi-Automatic Dual Mitering (Swivel) Band Saw
Video Icon
View Complete Specs
New-Baileigh-Brand New Baileigh Horizontal Automatic Metal Cutting Band Saw with Heavy Duty Bundling System-BS-20A-BA9-1001260-SMBS20A-01
Starting At:
$46,999.00
Finance as low as $963.95 Per Mo.*
13" x 18" Brand New Baileigh Horizontal Automatic Metal Cutting Band Saw with Heavy Duty Bundling System, Mdl. BS-20A, MFG Number BA9-1001260, Fully Automatic Operation of Feed & Cutting Functions, Hydraulic Feed with Bundling, Auger Type Chip Removal System, Touch Screen Controls, Variable Speed, Head Miters up to 45┬░, Hydraulic System, Heavy Duty In Feed/Out Feed Table, Blade Tension Device, Halogen Work Light, Coolant System, #SMBS20A
Stock No:#SMBS20A
Manufacturer: Baileigh
Capacity: 10" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Baileigh Horizontal Automatic Metal Cutting Band Saw with Heavy Duty Bundling System
Video Icon
View Complete Specs
New-Wellsaw-Brand New Wellsaw Horizontal Manual Bandsaw with Extended Capacity-1316S-EXT-SM1316SEXT-01
Starting At:
$18,019.00
13" x 18" Brand New Wellsaw Horizontal Manual Bandsaw with Extended Capacity, Mdl. 1316S-EXT, Saw Head Swivels on Precision Ball Bearings, Miter up to 60 Degrees, Large Protractor for Accurate Angle Selection, 5' x 18" Infeed Roller Conveyor, Spring Loaded Carbide Guides with Rollers, Combination Reduction Gearbox & Perimeter Ring Gear Blade Drive, Baldor Motor, Infinitely Variable Blade Speeds, Variable Hydraulic Downfeed Control, Work Light with Transformer, Rite-Tension Blade Tensioning Device, Wet Cutting System with Full Surround Pan, Powered Blade Brush, 110V at Controls, Magnetic Starter with Overload & Undervoltage Protection, Precision Ground Bed & Vise Jaws, Quick Acting Vise, Adjustable Stock Stop/Back Gauge, Auto Shut-Off at End of Cut, OSHA Blade Guarding, Tiger-Tooth Bi-Metal Blade, Coolant for Initial Start Up, #SM1316SEXT
Stock No:#SM1316SEXT
Manufacturer: Wellsaw
Capacity: 10" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Wellsaw Horizontal Manual Bandsaw with Extended Capacity
View Complete Specs
New-Wellsaw-Brand New Wellsaw Horizontal Semi-Automatic Miter Head (Swivel) Bandsaw with Extended Capacity-1316S-EXT-SA-SM1316SEXTSA-01
Starting At:
$18,110.00
13" x 18" Brand New Wellsaw Horizontal Semi-Automatic Miter Head (Swivel) Bandsaw with Extended Capacity, Mdl. 1316S-EXT-SA, PLC Controlled, Full Cycle Semi-Automatic Operation, Swivel Head Swivels on Precision Ball Bearings, Miter up to 60 Degrees, Large Protractor for Accurate Angle Selection, 5' x 18" Infeed Roller Conveyor, Work Light with Transformer, Variable Hydraulic Feed Rate Control, Spring Loaded Carbide Guides with Rollers, Combination Reduction Gearbox & Perimeter Ring Gear Blade Drive, Baldor Motor, Infinitely Variable Blade Speeds, Wet Cutting System with Full Surround Pan, Rite-Tension Blade Tensioning Device, Wet Cutting System, Powered Blade Brush, 110V at Controls, Magnetic Starter with Overload & Undervoltage Protection, Precision Ground Bed & Vise Jaws, Adjustable Stock Stop, Automatic End-of-Cut Shut Off, OSHA Blade Guarding, Tiger-Tooth Bi-Metal Blade, Coolant for Initial Start Up, #SM1316SEXTSA
Stock No:#SM1316SEXTSA
Manufacturer: Wellsaw
Capacity: 10" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Wellsaw Horizontal Semi-Automatic Miter Head (Swivel) Bandsaw with Extended Capacity
View Complete Specs
New-Wellsaw-Brand New Wellsaw Horizontal Manual Bandsaw-1318-SM1318-01
Starting At:
$11,720.00
13" x 18" Brand New Wellsaw Horizontal Manual Bandsaw, Mdl. 1318, Spring Loaded Carbide Guides with Rollers, Combination Reduction Gearbox & Perimeter Ring Gear Blade Drive, Baldor Motor, Infinitely Variable Blade Speeds, Rite-Tension Blade Tensioning Device, Wet Cutting System, Powered Blade Brush, 110V at Controls, Overload & Undervoltage Protection, Precision Ground Bed & Vise Jaws, Quick Acting Vise, Adjustable Stock Stop, Automatic End-of-Cut Shut Off, OSHA Blade Guarding, Tiger-Tooth Bi-Metal Blade, Coolant for Initial Start Up, #SM1318
Stock No:#SM1318
Manufacturer: Wellsaw
Capacity: 10" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Wellsaw Horizontal Manual Bandsaw
View Complete Specs
New-Acra-Brand New Acra Variable Speed
$8,500.00
10" x 15" Brand New Acra Variable Speed "SWIVEL HEAD MITER CUTTING" Horizontal "Heavy Duty" Bandsaw, Mdl. FHBS-250VS, Large Handwheel And Build-In Gauge For Easy Blade Tensioning, Built In Coolant, And Coolant Is Distributed Through The Blade Guides, Swivel Head Miter Cutting, #SMFHBS250VS
Stock No:#SMFHBS250VS
Manufacturer: Acra
Capacity: 10" x 15"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Acra Variable Speed
Video Icon
View Complete Specs
New-W.F. Wells-Brand New W.F. Wells Semi-Automatic Horizontal Twin Post Band Saw-W-10-1-SMW101-01
Starting At:
$24,150.00
10" x 17" Brand New W.F. Wells Semi-Automatic Horizontal Twin Post Band Saw, Mdl. W-10-1, 1" Bi-Metal Blade, Carbide Blade Guides, Manually Controlled Vise, Manually Controlled Blade Tension, Built-In Coolant System, Blade Powered Rotary Cleaning Brush, 45 Degree Swiveling Vise, All Motors & Controls, TEFC Motors, Electrics to NFPA 79 Standards, Low Voltage Protection, Overload Protection, Automatic End-of-Cut Shut Off, Quick & Easy Blade Speed Change, Blade Speed & Work Selector Chart, All Safety Guards, Hydraulic Oil, Operator Manual & Parts List, #SMW101
Stock No:#SMW101
Manufacturer: W.F. Wells
Capacity: 10" x 17"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New W.F. Wells Semi-Automatic Horizontal Twin Post Band Saw
View Complete Specs
New-W.F. Wells-Brand New W.F. Wells Semi-Automatic Horizontal Twin Post Band Saw-W-10-2-SMW102-01
Starting At:
$35,125.00
Finance as low as $720.41 Per Mo.*
10" x 17" Brand New W.F. Wells Semi-Automatic Horizontal Twin Post Band Saw, Mdl. W-10-2, 1" Bi-Metal Blade, Carbide Guide Blocks, Hydraulic Vise, Hydraulic Blade Pressure Control, Hydraulic Blade Tension Control, Blade Tension Indicator, Semi-Automatic Operation, All Motors & Controls, TEFC Motors, Fused Disconnect, Built-In Coolant System, Blade Powered Rotary Cleaning Brush, Feed Pressure Monitor & Regulator, All Safety Guards, Console Controlled Blade Speed & AC Drive, Gear Box Oil, Hydraulic Oil, Operator Manual & Parts List, #SMW102
Stock No:#SMW102
Manufacturer: W.F. Wells
Capacity: 10" x 17"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New W.F. Wells Semi-Automatic Horizontal Twin Post Band Saw
View Complete Specs
New-Acra-Brand New Acra Horizontal Bandsaw (Variable Speed Blade Control) (BEST SELLER)-RF-1018SV-SMRF1018SV-01
$4,600.00
10'' x 18'' Brand New Acra Horizontal Bandsaw (Variable Speed Blade Control) (BEST SELLER), Mdl. RF-1018SV, Coolant, #SMRF1018SV
Stock No:#SMRF1018SV
Manufacturer: Acra
Capacity: 10'' x 18''
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Acra Horizontal Bandsaw (Variable Speed Blade Control) (BEST SELLER)
Video Icon
View Complete Specs
New-Jet-Brand New Jet Horizontal Bandsaw -HBS-1018W-JT9-414473-SMHBS1018W-01
$7,245.00
10" x 18" Brand New Jet Horizontal Bandsaw , Mdl. HBS-1018W, MFG Number JT9-414473, Carbide Blade Guides Feature Parallel Double Row Ball Bearing Support, Coolant Distributed Through Blade Guides, Easy Access Chip Tray, Blade is Guarded, Regardless of Blade Guide Position, Large Hand Wheel & Built-In Gauge, Quick Positioning Vise with Adjustable Jaws, Fully Adjustable Hydraulic Downfeed, Automatic Shut-Off After Cut, Coolant System, Adjustable Material Stop, 1" Bi-Metal Blade, Jet Red Assurance 2-Year Warranty, #SMHBS1018W
Stock No:#SMHBS1018W
Manufacturer: Jet
Capacity: 10" x 18"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New
Brand New Jet Horizontal Bandsaw
Video Icon
View Complete Specs

Used Machines

Used-Ramco-Used Ramco Manual Horizontal Bandsaw-RS-90P-A7039-01
$1,750.00
8" x 13" Used Ramco Manual Horizontal Bandsaw, Mdl. RS-90P, Blade, Made In The U.S.A., #A7039
Stock No:#A7039
Manufacturer: Ramco
Capacity: 8" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
View Complete Specs
Used-Kalamazoo-Used Portable Kalamazoo Bandsaw with Wheels-7AW-A5997-01
$875.00
8" x 16" Used Kalamazoo Bandsaw, Mdl. 7AW, Wheels, #A5997 "as-is"
Stock No:#A5997
Manufacturer: Kalamazoo
Capacity: 8" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
View Complete Specs
Used-DoAll-DoAll Horizontal Band Saw (Swivel Head)-C916S-A7114-01
$8,500.00
9" x 16" DoAll Horizontal Band Saw (Swivel Head), Mdl. C916S, Year(1995) #A7114
Stock No:#A7114
Manufacturer: DoAll
Capacity: 9" x 16"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
View Complete Specs
Used-HEM-Used HEM Horizontal Pivot Head Semi Automatic Bandsaw-H130HM-A5851-01
$12,500.00
10" x 20" Used HEM Horizontal Pivot Head Semi Automatic Bandsaw, Mdl. H130HM, (1) Horizontal Hydraulic Clamp, Hydraulic Blade Guides, Hydraulic Raise & Fall Saw Head, Hydraulic Band Tensioning, 1,898 Hours On Meter, Hydraulic Vise, Swing Away Control, #A5851
Stock No:#A5851
Manufacturer: HEM
Capacity: 10" x 20"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
View Complete Specs
Used-HYDMECH-Used Hydmech Automatic Dual Post Horizontal Band Saw-H-11A-C5272-2-01
Call For Price
Stock No:#C5272-2
Manufacturer: HYDMECH
Capacity: 11" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
Video Icon
View Complete Specs
Used-HYDMECH-Used Hydmech Automatic Dual Post Horizontal Band Saw-H-11A-C5272-1-01
Call For Price
Stock No:#C5272-1
Manufacturer: HYDMECH
Capacity: 11" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
Video Icon
View Complete Specs
Used-HYDMECH-Used Hydmech Automatic Dual Post Horizontal Band Saw-H-11A-C5272-4-01
Call For Price
Stock No:#C5272-4
Manufacturer: HYDMECH
Capacity: 11" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
Video Icon
View Complete Specs
Used-HYDMECH-Used Hydmech Automatic Dual Post Horizontal Band Saw-H-11A-C5272-01
$23,500.00
11" x 13" Used Hydmech Automatic Dual Post Horizontal Band Saw, Mdl. H-11A, Split Front Vise, Full Capacity, Full Stroking Hydraulic Vises, Automatic PLC,Touch Screen Control Programmable To 100 Jobs With 20 In Queue, Replaceable Blade Brush, Easy Access Electrical Panel & Hydraulics, Hydraulically Powered Idler Side Guide Arm Is Adjustable, Automatic Chip Removal Auger, Designed For Safety With Saw-In-A-Box Style, Located East Coast In PA., Year(2015) #C5272
Stock No:#C5272
Manufacturer: HYDMECH
Capacity: 11" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
Video Icon
View Complete Specs
Used-HYDMECH-Used Hydmech Automatic Dual Post Horizontal Band Saw-H-11A-C5272-3-01
Call For Price
Stock No:#C5272-3
Manufacturer: HYDMECH
Capacity: 11" x 13"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
Video Icon
View Complete Specs
Used-HEM-Used Hem Fully Automatic Horizontal Bandsaw-H100A-P1062-01
$17,500.00
12.75" x 11" Used Hem Fully Automatic Horizontal Bandsaw, Mdl. H100A, Fully Automatic Hitchfeed Material Feeder, Coolant Tank, Hydraulic Vise Clamping, #P1062
Stock No:#P1062
Manufacturer: HEM
Capacity: 12.75" x 11"
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: Used
Video Icon
View Complete Specs
New Machines
Used Machines

SHIPPING

We're able to obtain brokers for Cross country and worldwide deliveries and only hire fully insured Flatbed Double Drops, Single Drops and Permitted Loads.

Make sure to get insurance, as this is not usually included. All machines come banded and strapped to a pallet unless instructed otherwise.
Crating is optional and comes at extra charge.
Loading docks or ramps are required! If you do not have one, inform the shipping company and there will more than likely be an extra charge.
* Indicates required fields

Sterling Machinery Exchange can help you with shipping worldwide. We ship daily and can get amazing shipping rates to make your purchase easier

Please let us know your information and we can find out the cost to your door!
Types of Trucking We Offer:

*TRUCKLOAD SHIPPING* The Full Truckload Advantage encompasses a comprehensive, end-to-end range of cargo transit and logistics solutions, backed by cutting-edge shipping analytic and monitoring technology.

  • Reduced Cost Per Unit
  • Shortened Transit Times
  • Fewer Damages
  • Dedicated Capacity
  • More Cargo Insurance
  • Thousands of Carriers to Choose From
  • Ail or Rubber Tire Option
  • Full Truckload
    • Van
    • Flatbed
    • Standard 48' Flatbed
    • Step Deck
    • Removable Goose Neck
    • Over-dimensional
    • Conestoga
    • Curtain Van
    • Refrigerated
    • Double-drop/Lowboy
  • Partial Truckload
    • Consolidated Truckloads
    • Volume LTL
    • Dedicated Partial Truckload
  • Specialized Services
    • Cross Dock
    • E-track/Logistical Trailers
    • Break Bulk
    • Short Term Warehousing
    • TWIC/TSA Services
    • White Glove
  • Intermodal
    • 48' and 53' Containers
    • 20', 40', and 45'
    • International Containers & High Cubes
    • Drayage (Port, Rail)
  • *LTL SHIPPING*

Our LTL shipping offers a best-in-class proprietary Transportation Management System tailored to the needs of LTL shippers. CARRIER RATE 2.0 provides an industry-leading, all-in-one solution for obtaining quotes, booking, and managing shipments.

    • Choose your carrier based on cost, transit time, and preference
    • Choose from industry leading carriers for your specific shipment
    • Schedule pickups with one click!
    • Track and manage your shipments online
  • QUOTE
    • Enter Origin & Destination Zip Codes
    • Select Package Type
    • Enter Pallet Count for Pallet Rate
    • Enter Class and Weight
    • Add Accessorials
  • *EXPEDITED SHIPPING*

We understand our transportation and logistics customers are looking for ways to save time and money. Air freight shipping means on-time delivery is a top priority. Our technology, relationships, and team of industry professionals provide an unparalleled ability to meet your most important shipping needs. Services Offerings

    • Next Flight Out (NFO’s)
    • Next Day by 1030
    • Exclusive Use Vehicles (E.U.V.’s)
    • Next Day by Noon
    • Local Pickup/Delivery
    • Next Day by 5pm
    • 2nd Day by 1030
    • 2nd Day by Noon
    • 2nd Day by 5pm
    • 3rd Day by 1030
    • 3rd Day by Noon
    • 3rd Day by 5pm
    • 3-5 Day Economy Ground
    • Trade Show Pickup/Delivery
    • Weekend Pickup/Delivery
    • Export/Import Freight
    • After Hours Pickup/Delivery
    • Project Freight/Distributions
    • Aircraft Charters
    • Ocean Services
 

Depth and Breadth of Line

JET offers a full range of machines to fill all your shop needs. Every operation of your project can be trusted to JET. Take a look at all the machines available for Woodworking, Metalworking, Lifting Systems, Air Tools, Warehouse and Dock and Handtools.
 Quality

Quality

Reliable, quality engineering and manufacturing goes into each and every JET machine. JET machines are built and tested to tight tolerance standards to insure consistent quality and precision operations.
 Innovative Products

Innovative Products

JET is committed to ongoing innovation demonstrated in the introduction of new products. 
 Manuals

Professional Manuals

JET and JET Elite manuals are professionally written by engineers for ease of use. All manuals come complete with parts breakdown and electrical drawings.
 warranty

Industry Leading Warranty

Your JET and JET Elite equipped shop is backed by JET Red Assurance one of the industry's most comprehensive warranties - confirming our confidence in the quality of our design and workmanship.
 service centers

Authorized Service Centers

JET offers over 750 authorized service centers across the USA. You can be assured a qualified local technician can help troubleshoot, order parts and repair your equipment should a problem arise. 

 

Find Machinery Across the United States