We're able to obtain brokers for Cross country and worldwide deliveries and only hire fully insured Flatbed Double Drops, Single Drops and Permitted Loads.
Make sure to get insurance, as this is not usually included. All machines come banded and strapped to a pallet unless instructed otherwise.
Crating is optional and comes at extra charge.
Loading docks or ramps are required! If you do not have one, inform the shipping company and there will more than likely be an extra charge.
14"/20" x 40" Brand New Atrump Precision Gap Bed Engine Lathe, Mdl. LD-1440, Hardened & Ground Gears in Headstock, Rapid Foot Break, Precision Taper Roller Bearing, Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding, 4 Jaw Independent Chuck 8", Face Plate 10", Complete Electric Control Unit, 3 Jaw Scroll Chuck 6", Tool Box & Kits, Hardened & Ground Bed Ways, Feed Rod is Equipped with Over Load Safety Clutch, Gap Bed, Change Gears, Rear Splash Guard, Steady Rest, 4 Way Tool Post, Floor Stand, Spindle Nose 1-1/2", #SMLD1440
Machine Type:
LATHES
Manufacturer:
Atrump
Model:
LD-1440
Capacity:
14"/20" x 40"
Condition:
New
Stock No:
#SMLD1440
Starting At: $11,250.00
DETAILED SPECIFICATION
| Swing Over Gap | 20-3/4" |
| Swing Over Saddle | 8-3/4" |
| Distance Between Centers | 40' |
| Bed | |
| Width of Bed Ways | 7-9/16" |
| Top Slide Travel | 4" |
| Cross Slide Travel | 6-1/2" |
| Spindle | |
| Spindle Nose Mounting | STD: D1-4 |
| Spindle Bore | 1-1/2" |
| Spindle Nose Taper & Sleeve | Outer M.T. #5, Inner M.T. #3 |
| Range Of Spindle Speeds | 9 Speed Gear Change |
| Thread & Feed | |
| Range of Inch Threads | 4 to 56 T.P.I. (32 kinds) |
| Range of Metric Threads | 0.4 to 7.0 (30 kinds) |
| Range of longitudinal feeds | 0.0026" to 0.0638"/rev |
| Range of Crossfeeds | 0.0013" to 0.03919"/rev |
| Tailstock | |
| Quill Taper | M.T. #3 |
| Quill Travel | 4" |
| Motor | |
| Main Spindle Motor | 3 H.P |
| Coolant Pump Motor | 1/8 H.P. |
| Warranty | One Year Limited Warranty |
| Horsepower | 8.5 H.P. |
| Voltage | 208V to 230V (Max) ~ 3 Phase |
| Dimensions (L x W x H) | 73" x 30" x 58" |
Features
4 Way Tool Post
Rear Splash Guard
Hardened & Ground Bed Ways
Hardened & Ground Gears In Headstock
Tool Box & Kits
Rapid Foot Break
Precision Taper Roller Bearing
Feed Rod Is Equipped With Over Load Safety Clutch
Steady Rest
Complete Electric Control Unit
Apron Equipped With Interlocking Device To Prevent Feeding Inter-Gearing During Automatic Feeding
Gap Bed
Change Gears
4 Jaw Independent Chuck 8"
Spindle Nose 1-1/2"
Floor Stand
Face Plate 10"
3 Jaw Scroll Chuck 6"
OPTIONAL EQUIPMENT AND TOOLING
Name: Atrump - Chuck Guard
Price: Call For Price
Stock No:# CH-13
ADD TO MACHINE QUOTE:
Name: Atrump - Quick Change Tool Post with 4 Tool Holders
Price: Call For Price
Stock No:# TLPT-QK13
ADD TO MACHINE QUOTE:
Name: Atrump - Taper Turning Attachment
Price: Call For Price
Stock No:# TA-13
ADD TO MACHINE QUOTE:
Name: Atrump - Import 5C Collet Closer
Price: Call For Price
Stock No:# 5CCC-13
ADD TO MACHINE QUOTE:
Name: Atrump - 2-Axis Import DRO (Brand: Carmar, Made in Taiwan)
Price: $1,260.00
Stock No:# SW-2-CM
ADD TO MACHINE QUOTE:
Name: Atrump - 2-Axis Newall DRO Equipment for XY Axis
Price: $2,800.00
Stock No:# C80-2-NW
ADD TO MACHINE QUOTE:
Name: Atrump - Installation of any 2-Axis DRO
Price: Call For Price
Stock No:# DRO-LATH
ADD TO MACHINE QUOTE:
Name: Atrump - Work Light (110V, 55W)
Price: $140.00
Stock No:# HL-110
ADD TO MACHINE QUOTE:
Name: Atrump - Single Saddle Stop
Price: Call For Price
Stock No:# 1P-STOP-13
ADD TO MACHINE QUOTE:
Name: Atrump - 4 Position Saddle Stop
Price: Call For Price
Stock No:# 4P-STOP-13
ADD TO MACHINE QUOTE:
* Temporary specifications subject to verification.
All quotations subject to prior sale.
New pricing is good only at time of invoice and must be paid Immediately to guarantee no price increases by the manufacturers.
Similar Machines
Starting At:
$14,500.00
Stock No:#SM1440SVS
Manufacturer: Acra
Capacity: 14"/20" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Starting At:
$12,350.00
Stock No:#SMYCL1440GH
Manufacturer: Birmingham
Capacity: 14"/20" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$11,950.00
Stock No:#SME1440V
Manufacturer: Acer
Capacity: 14"/20" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$1,500.00
Stock No:#P1040
Manufacturer: Acer
Capacity: 14"/20" x 40"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
Starting At:
$9,835.00
Stock No:#SMLD1340
Manufacturer: Atrump
Capacity: 13"/19" x 40"
Category: Lathes
Subcategory: Engine
Precision
Precision
Condition: New
View Complete Specs
Starting At:
$9,299.00
Stock No:#SMGHB1340A
Manufacturer: Jet
Capacity: 13" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
Video Icon
View Complete Specs
Starting At:
$8,799.00
Stock No:#SMBDB1340A
Manufacturer: Jet
Capacity: 13" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
Video Icon
View Complete Specs
$16,000.00
Stock No:#SM1440TE
Manufacturer: Acra
Capacity: 14 3/16"/ 21" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$7,650.00
Stock No:#SMYCL1440KGY
Manufacturer: Birmingham
Capacity: 14" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$8,350.00
Stock No:#SMGML1440BGF1
Manufacturer: GMC
Capacity: 14"/19" x 40"
Category: Lathes
Subcategory: Engine
Precision
Precision
Condition: New
Video Icon
View Complete Specs
$20,500.00
Stock No:#SM1440TVS
Manufacturer: Acra
Capacity: 14"/21" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$8,950.00
Stock No:#SMGML1440BGF3
Manufacturer: GMC
Capacity: 14"/19" x 40"
Category: Lathes
Subcategory: Engine
Precision
Precision
Condition: New
View Complete Specs
Starting At:
$14,999.00
Stock No:#SMPL1440E
Manufacturer: Baileigh
Capacity: 14" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Stock No:#SM1440MILITARY
Manufacturer: Standard Modern
Capacity: 14" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Stock No:#SM1440
Manufacturer: Standard Modern
Capacity: 14" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Used Machines
$7,950.00
Stock No:#A5504
Manufacturer: MONARCH
Capacity: 12.5" x 20"
Category: Lathes
Subcategory: Engine
Precision
Precision
Condition: Used
Video Icon
View Complete Specs
$9,250.00
Stock No:#A6992
Manufacturer: Cadillac
Capacity: 14"/21" x 40"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$8,750.00
Stock No:#A7249
Manufacturer: LeBlond Regal
Capacity: 15" x 54"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$10,500.00
Stock No:#A7295
Manufacturer: LeBlond Makino
Capacity: 15" x 54"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$9,750.00
Stock No:#A7057
Manufacturer: Victor
Capacity: 16"/23" x 40"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$6,950.00
Stock No:#A5996
Manufacturer: Goodway
Capacity: 16"/24" x 40"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$16,500.00
Stock No:#A7407
Manufacturer: Acra -Turn
Capacity: 16"/24" x 80"
Category: Lathes
Subcategory: Engine
Condition: Used
Video Icon
View Complete Specs
$13,500.00
Stock No:#A7312
Manufacturer: Webb
Capacity: 17" X 40"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$15,500.00
Stock No:#P1060
Manufacturer: Clausing
Capacity: 17"/26" X 45"
Category: Lathes
Subcategory: Engine
Condition: Used
Video Icon
View Complete Specs
$18,500.00
Stock No:#A7137
Manufacturer: Webb
Capacity: 17”/25" x 60”
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
New Machines
Used Machines
SHIPPING
Sterling Machinery Exchange can help you with shipping worldwide. We ship daily and can get amazing shipping rates to make your purchase easier
Please let us know your information and we can find out the cost to your door!
Types of Trucking We Offer:
*TRUCKLOAD SHIPPING* The Full Truckload Advantage encompasses a comprehensive, end-to-end range of cargo transit and logistics solutions, backed by cutting-edge shipping analytic and monitoring technology.
- Reduced Cost Per Unit
- Shortened Transit Times
- Fewer Damages
- Dedicated Capacity
- More Cargo Insurance
- Thousands of Carriers to Choose From
- Ail or Rubber Tire Option
- Full Truckload
- Van
- Flatbed
- Standard 48' Flatbed
- Step Deck
- Removable Goose Neck
- Over-dimensional
- Conestoga
- Curtain Van
- Refrigerated
- Double-drop/Lowboy
- Partial Truckload
- Consolidated Truckloads
- Volume LTL
- Dedicated Partial Truckload
- Specialized Services
- Cross Dock
- E-track/Logistical Trailers
- Break Bulk
- Short Term Warehousing
- TWIC/TSA Services
- White Glove
- Intermodal
- 48' and 53' Containers
- 20', 40', and 45'
- International Containers & High Cubes
- Drayage (Port, Rail)
- *LTL SHIPPING*
Our LTL shipping offers a best-in-class proprietary Transportation Management System tailored to the needs of LTL shippers. CARRIER RATE 2.0 provides an industry-leading, all-in-one solution for obtaining quotes, booking, and managing shipments.
- Choose your carrier based on cost, transit time, and preference
- Choose from industry leading carriers for your specific shipment
- Schedule pickups with one click!
- Track and manage your shipments online
- QUOTE
- Enter Origin & Destination Zip Codes
- Select Package Type
- Enter Pallet Count for Pallet Rate
- Enter Class and Weight
- Add Accessorials
- *EXPEDITED SHIPPING*
We understand our transportation and logistics customers are looking for ways to save time and money. Air freight shipping means on-time delivery is a top priority. Our technology, relationships, and team of industry professionals provide an unparalleled ability to meet your most important shipping needs. Services Offerings
- Next Flight Out (NFO’s)
- Next Day by 1030
- Exclusive Use Vehicles (E.U.V.’s)
- Next Day by Noon
- Local Pickup/Delivery
- Next Day by 5pm
- 2nd Day by 1030
- 2nd Day by Noon
- 2nd Day by 5pm
- 3rd Day by 1030
- 3rd Day by Noon
- 3rd Day by 5pm
- 3-5 Day Economy Ground
- Trade Show Pickup/Delivery
- Weekend Pickup/Delivery
- Export/Import Freight
- After Hours Pickup/Delivery
- Project Freight/Distributions
- Aircraft Charters
- Ocean Services
Atrump Machinery, Inc. incorporated in 1989. We provide the CNC and conventional machine tool industry with a complete line of Milling Machines (Knee & Bed); Precision Lathes; Universal and MONASET Tools and Cutter Grinders; CNC Mills (Knee, Bed and Machining Centers) and CNC Lathes.
Atrump is the U.S. distributor for EXTRON -- one of the top manufacturers of both CNC and manual bench lathes, precision engine lathes, knee mills and bed-type mills in Taiwan. Extron has been in business for over 35 years and has sold approximately 20,000 machines worldwide.
Extron is registered to ISO 9001, a universally accepted quality assurance designation. ISO registration is an indication of professionalism, capability and commitment to customer service earned through independent analysis of a company's quality management systems. We proudly stand behind our products and our ongoing commitment is to provide superior products and service.
What does this mean for you?
Peace of mind in knowing you will receive service from an organization with an ongoing commitment to provide superior products and service. Our partners and you, our customers, reap the benefits of our ISO 9001 registration.
Our top priorities will always be Quality, Service and Development.