We're able to obtain brokers for Cross country and worldwide deliveries and only hire fully insured Flatbed Double Drops, Single Drops and Permitted Loads.
Make sure to get insurance, as this is not usually included. All machines come banded and strapped to a pallet unless instructed otherwise.
Crating is optional and comes at extra charge.
Loading docks or ramps are required! If you do not have one, inform the shipping company and there will more than likely be an extra charge.
12" x 6" Brand New Atrump Monaset Manual Tool & Cutter Grinder, Mdl. CM-A , Equipped With An Digital Readout On The X, Y, & A Axis, and a High Precision Camera Device for precise Grinding, Sharpening, & Reconditioning Complex Tools & Cutters., Precise Ballscrew Using Grinding Wheel Side X & Y Axis, Precise Grinding Acme Lead Screw Using the Other Entire Axis, Swiveling, Turntable & Moveable Offset Slide, Wheelhead Toothrest Assembly with Extension Bar, Super Precision Match Sets Class 7 Bearing at Spindle, Grinding Wheel Guards With Extension Bar, Front Stock Support, Straight Cylindrical Collects: (A) Metric Sizes or (B) Inch Sizes, Set of 3 Taper Collects, Set of 5 Grinding Wheel Flanges, 4 Standard & 1 Extension Flange, Diamond Holder Bracket, Wrench for Workhead, Toothrest Entering Gauge, Adjustable Tailstock Support Unit, Spanner for Grinding Wheel, Leveling Blocks, Standard Arbor, Screwdriver, Set of Wrenches, Double End Spanner, Set of 4 Index Plates for Spiral Lead Mechanism, Tool Box, Oil Bottle, Grinding Wheels (1 Each of Straight, Flaring Cup & Dish Shape), Additional Diamond Truing Tool with Diamond Nib, Spring Loaded Index Pawl for Workhead, 1/2" Wheel Flange & Spanner, Grinding Attachment for Large Face Milling Cutter, 4" Six-Jaw Chuck for Workhead, Wheel Flange with 2 Collets for Internal Grinding, Wet Grinding Attachment with Water Proof Equipment, Casting Base to Reduce Vibration, Quality Certified by ISO 9002 & CE Standard, #SMCMA
Stock No:
#SMCMA
Manufacturer:
Atrump
Model:
CM-A
Capacity:
12" x 6"
Condition:
New
DETAILED SPECIFICATION
Capacity
12" x 6"
Work Head
Swing Over Main Slide (Diameter)
12"
Collet Work Diameter
1.25" (max)
Collet Work Diameter
0.19" (min)
Spiral Angle
60 Degrees (max)
Distance Between Speak of Spindle
3.93" (max)
Distance Between Center of Tailstock
5.98" (max)
Grinding Wheel Head
Grinding Diameter
3.93" (max)
Range
Slide Travel
5.11"
Offset Slide Travel
3.93"
Front Of Center
1.96"
Rear of Center
1.96"
Angle Adjustment of Workhead
Rotation of Horizontal Plane
+/- 105° (210°)
Rotational of Vertical Plane
+/- 40°
Slide Travel
4.33"
Vertical Slide Travel
9.44" (total)
Above Center
4.33"
Below Center
5.11"
Cross Slide Travel
6.7"
Front Of Center
2.75"
Rear of Center
3.93"
Spindle Speed
Wheelhead (3 Speeds)
4000/6000/8000 rpm
Motor
Workhead, AC
1/4 H.P.
Grinding Wheelhead, AC
1/2 H.P.
Warranty
One Year Limited Warranty
Power Requirements
6.5 KVA 3 Phase 208V to 230V (Max)
Dimensions (L x W x H)
82" x 45" x 80"
WEIGHT
2270 lbs
EQUIPPED WITH
Equipped With An Digital Readout On The X, Y, & A Axis, And A High Precision Camera Device For Precise Grinding, Sharpening, & Reconditioning Complex Tools & Cutters.
Precise Ballscrew Using Grinding Wheel Side X & Y Axis
Precise Grinding Acme Lead Screw Using The Other Entire Axis
Swiveling, Turntable & Moveable Offset Slide
Wheelhead Toothrest Assembly With Extension Bar
Super Precision Match Sets Class 7 Bearing At Spindle
Tool Box
Grinding Wheel Guards With Extension Bar
Front Stock Support
Straight Cylindrical Collects: (A) Metric Sizes Or (B) Inch Sizes
Set Of Wrenches
Set Of 3 Taper Collects
Set Of 5 Grinding Wheel Flanges, 4 Standard & 1 Extension Flange
Diamond Holder Bracket
Wrench For Workhead
Toothrest Entering Gauge
Adjustable Tailstock Support Unit
Spanner For Grinding Wheel
Leveling Blocks
Standard Arbor
Screwdriver
Double End Spanner
Set Of 4 Index Plates For Spiral Lead Mechanism
Oil Bottle
Grinding Wheels (1 Each Of Straight, Flaring Cup & Dish Shape)
Additional Diamond Truing Tool With Diamond Nib
Spring Loaded Index Pawl For Workhead
1/2" Wheel Flange & Spanner
Grinding Attachment For Large Face Milling Cutter
4" Six-Jaw Chuck For Workhead
Wheel Flange With 2 Collets For Internal Grinding
Wet Grinding Attachment With Water Proof Equipment
Casting Base To Reduce Vibration
Quality Certified By ISO 9002 & CE Standard
OPTIONAL EQUIPMENT AND TOOLING
Name: Atrump - Large Cutter Radius Grinding Attachment
Price: Call For Price
Stock No:# CM2-OPT01
ADD TO MACHINE QUOTE:
Name: Atrump - 4" Universal 6-Jaw Chuck for Workhead
Price: Call For Price
Stock No:# CM2-OPT02
ADD TO MACHINE QUOTE:
Name: Atrump - Frequency Inverter for Grinding Wheel Spindle - 1HP
Price: Call For Price
Stock No:# FREQINVERTER-1HP
ADD TO MACHINE QUOTE:
Name: Atrump - Frequency Inverter for Grinding Wheel Spindle - 2HP
Price: Call For Price
Stock No:# FREQINVERTER-2HP
ADD TO MACHINE QUOTE:
Name: Atrump - Upgrading Grinding Wheel/Spindle Motor to 2HP
Price: Call For Price
Stock No:# UPGRADEGWHEEL/SPINDLE-2HP
ADD TO MACHINE QUOTE:
Name: Atrump - Dust Collector (1HP)
Price: Call For Price
Stock No:# DUSTCOLL-1HP
ADD TO MACHINE QUOTE:
* Temporary specifications subject to verification.
All quotations subject to prior sale.
New pricing is good only at time of invoice and must be paid Immediately to guarantee no price increases by the manufacturers.
Similar Machines
Stock No:#SMCM2
Manufacturer: Atrump
Capacity: 12" x 6"
Category: Grinders
Subcategory: Tool & Cutter
Condition: New
View Complete Specs
Call For Price
Stock No:#SMTR520
Manufacturer: Atrump
Capacity: 7" x 4" x 5"
Category: Grinders
Subcategory: Tool & Cutter
Condition: New
View Complete Specs
Stock No:#SMTE5
Manufacturer: Atrump
Capacity: 9" x 8" x 9"
Category: Grinders
Subcategory: Tool & Cutter
Condition: New
View Complete Specs
Stock No:#SMM40
Manufacturer: Atrump
Capacity: 9" x 27"
Category: Grinders
Subcategory: Tool & Cutter
Condition: New
View Complete Specs
Stock No:#SMTD2
Manufacturer: Atrump
Capacity: 11" x 5"
Category: Grinders
Subcategory: Tool & Cutter
Condition: New
View Complete Specs
Stock No:#SMTD3
Manufacturer: Atrump
Capacity: 11" x 5"
Category: Grinders
Subcategory: Tool & Cutter
Condition: New
View Complete Specs
Used Machines
$5,500.00
Stock No:#C5228
Manufacturer: Optima Scale
Capacity: 1"
Category: Grinders
Scale and Weight
Scale and Weight
Subcategory: Grinders, Cylindrical Plain (Angle) & Universal
Tool & Cutter
Tool & Cutter
Condition: Used
View Complete Specs
$2,000.00
Stock No:#A2841
Manufacturer: DECKEL
Capacity: 1/32" to 11/16"
Category: Grinders
Subcategory: Tool & Cutter
Condition: Used
View Complete Specs
$19,500.00
Stock No:#A7090
Manufacturer: Amada
Capacity: 6.30" x 9.45"
Category: Grinders
Subcategory: Tool & Cutter
Condition: Used
View Complete Specs
$19,500.00
Stock No:#A7119
Manufacturer: Amada
Capacity: 6.30" x 9.45"
Category: Grinders
Subcategory: Tool & Cutter
Condition: Used
View Complete Specs
$1,750.00
Stock No:#A4571
Manufacturer: HAMMOND
Capacity: 10"
Category: Grinders
Subcategory: Tool & Cutter
Condition: Used
View Complete Specs
$18,750.00
Stock No:#A6899
Manufacturer: DCM
Capacity: 18"
Category: Grinders
Subcategory: Tool & Cutter
Condition: Used
Video Icon
View Complete Specs
New Machines
Used Machines
SHIPPING
Sterling Machinery Exchange can help you with shipping worldwide. We ship daily and can get amazing shipping rates to make your purchase easier
Please let us know your information and we can find out the cost to your door!
Types of Trucking We Offer:
*TRUCKLOAD SHIPPING* The Full Truckload Advantage encompasses a comprehensive, end-to-end range of cargo transit and logistics solutions, backed by cutting-edge shipping analytic and monitoring technology.
- Reduced Cost Per Unit
- Shortened Transit Times
- Fewer Damages
- Dedicated Capacity
- More Cargo Insurance
- Thousands of Carriers to Choose From
- Ail or Rubber Tire Option
- Full Truckload
- Van
- Flatbed
- Standard 48' Flatbed
- Step Deck
- Removable Goose Neck
- Over-dimensional
- Conestoga
- Curtain Van
- Refrigerated
- Double-drop/Lowboy
- Partial Truckload
- Consolidated Truckloads
- Volume LTL
- Dedicated Partial Truckload
- Specialized Services
- Cross Dock
- E-track/Logistical Trailers
- Break Bulk
- Short Term Warehousing
- TWIC/TSA Services
- White Glove
- Intermodal
- 48' and 53' Containers
- 20', 40', and 45'
- International Containers & High Cubes
- Drayage (Port, Rail)
- *LTL SHIPPING*
Our LTL shipping offers a best-in-class proprietary Transportation Management System tailored to the needs of LTL shippers. CARRIER RATE 2.0 provides an industry-leading, all-in-one solution for obtaining quotes, booking, and managing shipments.
- Choose your carrier based on cost, transit time, and preference
- Choose from industry leading carriers for your specific shipment
- Schedule pickups with one click!
- Track and manage your shipments online
- QUOTE
- Enter Origin & Destination Zip Codes
- Select Package Type
- Enter Pallet Count for Pallet Rate
- Enter Class and Weight
- Add Accessorials
- *EXPEDITED SHIPPING*
We understand our transportation and logistics customers are looking for ways to save time and money. Air freight shipping means on-time delivery is a top priority. Our technology, relationships, and team of industry professionals provide an unparalleled ability to meet your most important shipping needs. Services Offerings
- Next Flight Out (NFO’s)
- Next Day by 1030
- Exclusive Use Vehicles (E.U.V.’s)
- Next Day by Noon
- Local Pickup/Delivery
- Next Day by 5pm
- 2nd Day by 1030
- 2nd Day by Noon
- 2nd Day by 5pm
- 3rd Day by 1030
- 3rd Day by Noon
- 3rd Day by 5pm
- 3-5 Day Economy Ground
- Trade Show Pickup/Delivery
- Weekend Pickup/Delivery
- Export/Import Freight
- After Hours Pickup/Delivery
- Project Freight/Distributions
- Aircraft Charters
- Ocean Services
Atrump Machinery, Inc. incorporated in 1989. We provide the CNC and conventional machine tool industry with a complete line of Milling Machines (Knee & Bed); Precision Lathes; Universal and MONASET Tools and Cutter Grinders; CNC Mills (Knee, Bed and Machining Centers) and CNC Lathes.
Atrump is the U.S. distributor for EXTRON -- one of the top manufacturers of both CNC and manual bench lathes, precision engine lathes, knee mills and bed-type mills in Taiwan. Extron has been in business for over 35 years and has sold approximately 20,000 machines worldwide.
Extron is registered to ISO 9001, a universally accepted quality assurance designation. ISO registration is an indication of professionalism, capability and commitment to customer service earned through independent analysis of a company's quality management systems. We proudly stand behind our products and our ongoing commitment is to provide superior products and service.
What does this mean for you?
Peace of mind in knowing you will receive service from an organization with an ongoing commitment to provide superior products and service. Our partners and you, our customers, reap the benefits of our ISO 9001 registration.
Our top priorities will always be Quality, Service and Development.