We're able to obtain brokers for Cross country and worldwide deliveries and only hire fully insured Flatbed Double Drops, Single Drops and Permitted Loads.
Make sure to get insurance, as this is not usually included. All machines come banded and strapped to a pallet unless instructed otherwise.
Crating is optional and comes at extra charge.
Loading docks or ramps are required! If you do not have one, inform the shipping company and there will more than likely be an extra charge.
30" x 40" Brand New Atrump CNC Turning (Wheel - Rim) Flat Bed Lathe, Mdl. , Centroid T400i Control with 15" LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" Through Hole Spindle, Maximum 2,200 RPM Spindle Speed With Auto Shift 3 Gear Range, Hardened & Ground With Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, USB 2.0 Port, Halogen Work Light, Full Enclosed Guarding, Coolant System, Leveling Bolts, USB 2.0 Port, 60 GB Solid State Hard Drive, SIngle Position Quick Change Tool Post, Shop Floor Programming/Conversational, Digitizing Package with Software, 1 Day of Training and Set-Up, On-Site, 12" 3 Jaw Chuck, Dual Hand Wheel for Manual Operation, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Meehanite Casting Main Frame with Annealed & Stress Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, 14" Wide Bed Ways Design to Provide Maximum Rigidity & Stability, Massive One Piece Casting Construction for Maximum Cutting Performance, #SMRL3040NC
Machine Type:
LATHES
Manufacturer:
Atrump
Model:
RL-3040NC
Capacity:
30" x 40"
Condition:
New
Stock No:
#SMRL3040NC
DETAILED SPECIFICATION
| Basic Dimensions | |
| Height of Centers | 15" |
| Swing Over Cross Slide | 16" |
| Distance Between Centers | 40" |
| Bed Width | 13.78" |
| Spindle | |
| Spindle Nose | D1-8 |
| Spindle Bore | 3-3/8" |
| Taper of Spindle Bore | MT #7 (Sleeve MT #5) |
| Range Of Spindle Speeds | Auto Shift High - Middle - Low |
| Z-Axis Travel | 31.5" |
| X-Axis Travel | 11.6" |
| Rapid Traverse | 270 IPM |
| Cutting Feed Rate | 120 IPM |
| Tool | |
| Maximum Cutting Tool Size | 1" |
| Oil Types | |
| Ways | Mobil Vectra #2 |
| Coolant | Mobil 1 Gear |
| Pneumatic | Air Tool Oil |
| Controller | Centroid |
| CNC Axis | 2 |
| Coolant Tank Capacity | 3.5 Gallons |
| Warranty | One Year Limited Warranty |
| Horsepower | 10 H.P. |
| Power Requirements | 20 H.P., 3 Phase, 208V to 230V (Max) |
| WEIGHT | 7,200 Lbs. |
Features
Centroid T400I Control With 15" LCD
10 H.P. Spindle Motor, D1-8, 3-3/8" Through Hole Spindle
Maximum 2,200 RPM Spindle Speed With Auto Shift 3 Gear Range
Halogen Work Light
Coolant System
C5 Double Nut Precision Ball Screws Hardened & Ground For High Accuracy And Long Lasting
Hardened & Ground With Turcite-B Coating Guide Way
Full Enclosed Guarding
Leveling Bolts
100% Laser Tested For Positioning Accuracy & Repeatability
60 GB Solid State Hard Drive
USB 2.0 Port
Single Position Quick Change Tool Post
Shop Floor Programming/Conversational
Digitizing Package With Software
1 Day Of Training And Set-Up, On-Site
12" 3 Jaw Chuck
Dual Hand Wheel For Manual Operation
FC30 Meehanite Casting Main Frame With Annealed & Stress Relieved For Long Term Reliability
14" Wide Bed Ways Design To Provide Maximum Rigidity & Stability
Massive One Piece Casting Construction For Maximum Cutting Performance
* Temporary specifications subject to verification.
All quotations subject to prior sale.
New pricing is good only at time of invoice and must be paid Immediately to guarantee no price increases by the manufacturers.
Similar Machines
Stock No:#SMWL24
Manufacturer: Atrump
Capacity: 24"
Category: Lathes
Subcategory: CNC
Condition: New
View Complete Specs
Stock No:#SMKL2440
Manufacturer: Atrump
Capacity: 24" x 40"
Category: Lathes
Subcategory: CNC
Condition: New
View Complete Specs
Stock No:#SMRL2440NC
Manufacturer: Atrump
Capacity: 24" x 40"
Category: Lathes
Subcategory: CNC
Condition: New
View Complete Specs
Stock No:#SMKL2460
Manufacturer: Atrump
Capacity: 24" x 60"
Category: Lathes
Subcategory: CNC
Condition: New
View Complete Specs
Stock No:#SMKL2480
Manufacturer: Atrump
Capacity: 24" x 80"
Category: Lathes
Subcategory: CNC
Condition: New
View Complete Specs
$66,593.00
Finance as low as $1,365.82 Per Mo.*
Stock No:#SMLLTTPST24120
Manufacturer: Lagun
Capacity: 24" x 120"
Category: Lathes
Subcategory: CNC
Condition: New
View Complete Specs
$45,609.00
Finance as low as $935.44 Per Mo.*
Stock No:#SMLS28120
Manufacturer: Lagun
Capacity: 28" x 120"
Category: Lathes
Subcategory: Engine
Precision
CNC
Precision
CNC
Condition: New
View Complete Specs
Stock No:#SMKL3060
Manufacturer: Atrump
Capacity: 30" x 59"
Category: Lathes
Subcategory: CNC
Condition: New
View Complete Specs
Stock No:#SMKL3080
Manufacturer: Atrump
Capacity: 30" x 78"
Category: Lathes
Subcategory: CNC
Condition: New
View Complete Specs
Stock No:#SMKL30120
Manufacturer: Atrump
Capacity: 30" x 118"
Category: Lathes
Subcategory: CNC
Condition: New
View Complete Specs
New Machines
Used Machines
SHIPPING
Sterling Machinery Exchange can help you with shipping worldwide. We ship daily and can get amazing shipping rates to make your purchase easier
Please let us know your information and we can find out the cost to your door!
Types of Trucking We Offer:
*TRUCKLOAD SHIPPING* The Full Truckload Advantage encompasses a comprehensive, end-to-end range of cargo transit and logistics solutions, backed by cutting-edge shipping analytic and monitoring technology.
- Reduced Cost Per Unit
- Shortened Transit Times
- Fewer Damages
- Dedicated Capacity
- More Cargo Insurance
- Thousands of Carriers to Choose From
- Ail or Rubber Tire Option
- Full Truckload
- Van
- Flatbed
- Standard 48' Flatbed
- Step Deck
- Removable Goose Neck
- Over-dimensional
- Conestoga
- Curtain Van
- Refrigerated
- Double-drop/Lowboy
- Partial Truckload
- Consolidated Truckloads
- Volume LTL
- Dedicated Partial Truckload
- Specialized Services
- Cross Dock
- E-track/Logistical Trailers
- Break Bulk
- Short Term Warehousing
- TWIC/TSA Services
- White Glove
- Intermodal
- 48' and 53' Containers
- 20', 40', and 45'
- International Containers & High Cubes
- Drayage (Port, Rail)
- *LTL SHIPPING*
Our LTL shipping offers a best-in-class proprietary Transportation Management System tailored to the needs of LTL shippers. CARRIER RATE 2.0 provides an industry-leading, all-in-one solution for obtaining quotes, booking, and managing shipments.
- Choose your carrier based on cost, transit time, and preference
- Choose from industry leading carriers for your specific shipment
- Schedule pickups with one click!
- Track and manage your shipments online
- QUOTE
- Enter Origin & Destination Zip Codes
- Select Package Type
- Enter Pallet Count for Pallet Rate
- Enter Class and Weight
- Add Accessorials
- *EXPEDITED SHIPPING*
We understand our transportation and logistics customers are looking for ways to save time and money. Air freight shipping means on-time delivery is a top priority. Our technology, relationships, and team of industry professionals provide an unparalleled ability to meet your most important shipping needs. Services Offerings
- Next Flight Out (NFO’s)
- Next Day by 1030
- Exclusive Use Vehicles (E.U.V.’s)
- Next Day by Noon
- Local Pickup/Delivery
- Next Day by 5pm
- 2nd Day by 1030
- 2nd Day by Noon
- 2nd Day by 5pm
- 3rd Day by 1030
- 3rd Day by Noon
- 3rd Day by 5pm
- 3-5 Day Economy Ground
- Trade Show Pickup/Delivery
- Weekend Pickup/Delivery
- Export/Import Freight
- After Hours Pickup/Delivery
- Project Freight/Distributions
- Aircraft Charters
- Ocean Services
Atrump Machinery, Inc. incorporated in 1989. We provide the CNC and conventional machine tool industry with a complete line of Milling Machines (Knee & Bed); Precision Lathes; Universal and MONASET Tools and Cutter Grinders; CNC Mills (Knee, Bed and Machining Centers) and CNC Lathes.
Atrump is the U.S. distributor for EXTRON -- one of the top manufacturers of both CNC and manual bench lathes, precision engine lathes, knee mills and bed-type mills in Taiwan. Extron has been in business for over 35 years and has sold approximately 20,000 machines worldwide.
Extron is registered to ISO 9001, a universally accepted quality assurance designation. ISO registration is an indication of professionalism, capability and commitment to customer service earned through independent analysis of a company's quality management systems. We proudly stand behind our products and our ongoing commitment is to provide superior products and service.
What does this mean for you?
Peace of mind in knowing you will receive service from an organization with an ongoing commitment to provide superior products and service. Our partners and you, our customers, reap the benefits of our ISO 9001 registration.
Our top priorities will always be Quality, Service and Development.